• Apple-13632793113
  • Vivi-18038057749
Email:sales@sunsoartech.com Shenzhen Sunsoar Tech Co.,Ltd

Shenzhen Sunsoar Tech Co.,Ltd

Product Categories
Contact Us

Sunsoar Tech

4F, E block, Nanchang Huafeng
The Second Industrial Zone
Hangkong Road, Xixiang Town
Bao'an District, Shenzhen City
China


Contact Information 

Tel: +86 755-82956801

Mob: +86 136 3279 3113

Fax: +86 755-82954160

Email: sales@sunsoartech.com

Web: www.sunsoartech.com

What Is The Importance Of PCB Board Production?

In printed circuit boards, copper is used to interconnect components on the substrate. Although it is a good conductor material for forming the pattern of the conductive path of the printed circuit board, if it is exposed to the air for a long time, It is also easy to lose luster due to oxidation and lose weldability due to corrosion. Therefore, various techniques must be used to protect copper traces, vias, and plated vias, including organic paints, oxide films, and plating techniques.


pcb-assemblyandroid-usb-charger-immersion36218099299


 Organic lacquering is very simple to apply, but it is not suitable for long-term use due to changes in its concentration, composition and curing cycle, and it can even lead to unpredictable deviations in weldability. The oxide film protects the circuit from corrosion, but it does not maintain solderability. Electroplating or metal coating processes are standard operations to ensure solderability and protect circuits from erosion, and play an important role in the manufacture of single-sided, double-sided and multilayer printed wiring boards. In particular, plating a layer of weldable metal on a printed wire has become a standard operation for providing a solder resist to a copper printed wire.


    The interconnection of various modules in an electronic device often requires the use of printed circuit board headers with spring contacts and printed circuit boards with connection contacts that are designed to match them. These contacts should have a high degree of wear resistance and a very low contact resistance, which requires a thin layer of metal to be plated, the most commonly used metal being gold. In addition, other coating metals can be used on the printing line, such as tin plating, plated soldering, and sometimes copper plating in certain printed wiring areas.


    Another coating on copper lines is organic, usually a solder mask, which is coated with an epoxy film using screen printing techniques where soldering is not required. This process of coating an organic solder resist does not require electronic exchange. When the board is immersed in the electroless bath, a nitrogen-tolerant compound can be attached to the exposed metal surface without being absorbed by the substrate. .


    The precise technical and environmental and safety requirements required for electronic products have led to significant advances in electroplating practice, which is evident in the manufacture of high-complexity, high-resolution multi-substrate technology. In electroplating, electroplating technology has reached a high level through the development of automated, computer-controlled electroplating equipment, the development of highly complex instrumentation techniques for the chemical analysis of organic and metal additives, and the emergence of techniques for precisely controlling chemical reaction processes. s level.


Copyright © Shenzhen Sunsoar Tech Co.,Ltd. All rights reserved.
QR Code

Shenzhen Sunsoar Tech Co.,Ltd